SILCA Chain Stripper makes preparing your chain for wax fast, easy, and eco-friendly. In less than 10 minutes, it completely removes factory grease or old lubricants while priming the metal for maximum wax adhesionwithout the need for harsh chemicals or multiple solvent baths.

Unlike traditional degreasing methods that require 23 different solvents and multiple rinses, SILCA Chain Stripper uses a biodegradable formula that lifts and encapsulates grease and oil so they can be easily rinsed away. At the same time, it leaves behind a surface optimised for wax bonding, resulting in a cleaner drivetrain and longer-lasting wax performance.

Two Easy Cleaning Methods:

• Hot-Melt Waxing: Remove the chain, immerse in Stripper, agitate for 30 seconds, soak for 510 minutes, agitate again, then rinse with water. Drop the chain straight into hot waxany remaining water will boil off quickly, leaving a fully waxed chain with up to 30% longer life than chains prepped by traditional methods.

• Drip Waxing (On-Bike): Apply 1 drop to each roller while backpedalling, soak for 5 minutes, backpedal to agitate, reapply, soak again, then rinse with water while backpedalling.

Why Use SILCA Chain Stripper?

• Cleans and primes the chain in a single step.
• Improves wax adhesion and durability.
• Works with the chain on or off the bike.
• Reduces prep time to under 10 minutes.
• Biodegradable and made in the USA.

Whether youre switching to a waxed drivetrain for the first time or maintaining your current setup, SILCA Chain Stripper takes the hassle out of the process and delivers pro-level results at home.